Voxel8 Demonstrates Its Electronics-Capable 3D Printer at CES 2015 | MAKE

2 Comments

1. January 12, 2015 at 9:33 am

   Tomi Engdahl says:

   Circuit printers: Voltera and Voxel8
   http://hackaday.com/2015/01/09/circuit-printers-voltera-and-voxel8/

   There are two printers being shown off at the 2015 Consumer Electronics shows which really spark our interest. They are the Voltera and the Voxel8. Each is taking on the challenge of printing circuits. They use similar techniques but approach the problem in very different ways.

   Reply
2. January 18, 2015 at 5:22 pm

   Tomi Engdahl says:

   Circuit Plotting With An HP Plotter
   http://hackaday.com/2015/01/18/circuit-plotting-with-an-hp-plotter/

   Over the last few years we’ve seen a few commercial products that aim to put an entire PCB fab line on a desktop. As audacious as that sounds, there were a few booths showing off just that at CES last week, with one getting a $50k check from some blog. [Connor] and [Feiran] decided to do the hacker version of a PCB printer: an old HP plotter converted to modern hardware with a web interface with a conductive ink pen.

   ECE 4760 Final Project: Rapid Circuit Prototyping
   by Connor Archard and Feiran Chen
   http://people.ece.cornell.edu/land/courses/ece4760/FinalProjects/f2014/fc254_cwa37/index.html

   Reply