MOSFET testing

Multimeters are very good tools to find out problems in electronics circuits and testing electronics components. Resistor measurement is found in practically all multimeters, capacitance measurement range is becoming more and more common and some high-end models can also measure inductance. Many multimeters have also possiblity to test bipolar transistors (Hfe measurement range), but I don’t remeber that I would have seen any multimeter that has measuring range for FET testing.  Properly testing all properties of a MOSFET requires a lot of expensive test gear. What would be useful is a way to easily have a working or not working result with some simple test that can be made with a normal multimeter and maybe few other components.

MOSFET TESTING page published by Integrated Publishing gives you idea how to test P-channel FET, N-channel FET and MOSFET with a multimeter. Testing a MOSFET web page gives you a simple testing procedure is for use with a digital multimeter. For the provedure to work you need a digital multimeter in the diode test-range with a minimum of 3.3 volt over d.u.t. (diode-under-test). If your multi-meter is less than that it will not do the test. 4QD Tec MOSFET testing page starts by giving a pretty similar test procedure, but continues with an improved test setup that need few extra components.

Please note that MOSFETs are very sensitive to electrostatic charges and can be easily damaged by them. A vacuum plunger (solder sucker) must not be used because of the high electrostatic charges it can generate. Solder removal by wicking or using professional ESD safe tools is recommended. It is also good practice to wrap MOSFETs in metal foil when they are out of a circuit.

mostest

21 Comments

  1. Creola Antrican says:

    can i see more of this please

    Reply
  2. Slow Computer jacksonville says:

    This is an epic post, I’ll definitely be adding this site to my bookmarks :D

    Reply
  3. Corrinne Stirk says:

    I had been just surfing the world-wide-web and I arrived throughout this page. I actually liked the knowledge, preserve up the beneficial perform.

    Reply
  4. Julieann Sacarello says:

    This matter was incredibly beneficial and perfectly created. I plan to try and do some far more investigation on this. With thanks for discussing this timely data. We have to have far more this way.

    Reply
  5. Vicenta Chez says:

    :O So mush Details :O … That is he MOst Amazing Site DUDe…

    Reply
  6. Antone Edin says:

    great post my friend, very nice. congrats! if you have some time, take a look on my page, is linked to my name

    Reply
  7. Bumper Motor Home Repair: Welding of plastics | Best and Free tips ... says:

    Welding Equipment Arc Welding | Best and Free tips on the Plastic ……

    Welding is used primarily for a combination of these processes, which arc, resistance, laser, electron, breeding and orbital welding….

    Reply
  8. [email protected] says:

    There are two possible outcomes: if the result confirms the hypothesis, then you’ve made a measurement. If the result is contrary to the hypothesis, then you’ve made a discovery.

    Reply
  9. weld testing says:

    looking forward to future posts, added to Rss feed

    Reply
  10. langlang33 says:

    Hi.thanks for this good information.Im so pleased because its extremely helpful for my thesis research.I hope you will keep updating your content constantly as you’ve 1 dedicated reader here

    Reply
  11. Alberto Knicely says:

    I was just searching for this information for some time. After 6 hours of continuous Googleing, at last I got it in your web site. I wonder what is the lack of Google strategy that do not rank this type of informative sites in top of the list. Usually the top web sites are full of garbage.

    Reply
  12. Stephine says:

    Thank you for this unique tremendous piece of writing – MOSFET testing Tomi Engdahl’s ePanorama blog

    Reply
  13. Advanced Option Strategy Screening and Analysis says:

    I’m typically to running a blog and i actually admire your content. The article has actually peaks my interest. I am going to bookmark your site and maintain checking for brand new information.

    Reply
  14. Seth Rohla says:

    Amazing write-up shows you the low down of USB Card Reader in addition to the reasons why you need to take action straight away. Right here is the USB Card Reader truths your folks doesn’t want you to know Enhance your USB Card Reader within half the time without having to spend additional cash!

    Reply
  15. hermes catalog says:

    Hi, i believe that i saw you visited my weblog thus i came to return the want?.I’m attempting to find issues to improve my site!I assume its good enough to use a few of your ideas!!

    Reply
  16. Melida Phaup says:

    I like this weblog very much, Its a real nice billet to read and obtain information. “Famous remarks are very seldom quoted correctly.” by Simeon Strunsky.

    Reply
  17. Yevette Millward says:

    Thanks for the sensible critique. Me & my neighbor were just preparing to do a little research on this. We got a grab a book from our local library but I think I learned more from this post. I’m very glad to see such fantastic info being shared freely out there.

    Reply
  18. Tomi Engdahl says:

    The shocking truth about FETs
    http://www.edn.com/electronics-blogs/tales-from-the-cube/4392140/The-shocking-truth-about-FETs?cid=EDNToday

    Now, switch-mode bipolar transistors almost always need a resistor in the base to reduce the load on the driving component, but a field-effect transistor such as the 2N7000 can operate without such a resistor. So even though the 2N7000 is a bit more expensive than a bipolar, getting rid of the resistor more than makes up for the difference in cost.

    The conclusion appears inescapable: Unless you can enforce adequate ESD procedures, you would be advised to avoid the use of unprotected FET devices such as the 2N7000.

    Reply
  19. Darmowa says:

    Its fantastic as your other posts : D, thanks for putting up. “Reason is the substance of the universe. The design of the world is absolutely rational.” by Georg Wilhelm Friedrich Hegel.

    Reply
  20. Glad says:

    Do you have a spam problem on this blog; I also am a blogger, and I was wondering your situation; many of us have developed some nice practices and we are looking to swap techniques with others, be sure to shoot me an email if interested.

    Reply

Leave a Reply to weld testing Cancel reply

Your email address will not be published. Required fields are marked *

*

*