Improved laptop grounding idea

Many laptops are pretty well known for having terrible audio interfaces. There are usually noise and grounding issues.

A recent post Yet Another Dell Laptop Audio Grounding Problem blog posting documents a well known and horrendous audio problem found on many Dell laptops. I have faced similar noise problems also on other laptops as well.

Starting from Dell laptops. I did some analysis on one DELL INSPIRON laptop that used 3 pin power connector on the laptop. First I measured the resistance between laptop metal parts and mains lead ground and found out that the ground is pretty well connected to laptop case. The strange thing happened when I had the laptop running: I measured a around 200 mV DC voltage between mains ground and computer case! And that voltage difference can cause up to several hundred milliamperes of pretty noisy current through the audio cables that are connected to grounded audio equipment! For more details read my Dell laptop ground loop problems posting.

dell_laptop

I think that that this kind of grounded low voltage side is pretty common on laptop power supplied.

Here is the way the laptop power supply grounding should have been built to avoid the problem:

fixed_laptop_psu

In this configuration there is a separate wires on the cable to carry mains ground reference to laptop and to carry the DC power – side. This avoids the voltage losses on the DC- side to show on the ground potential. In ideal configuration there should be separate pins on the power supply connector for carrying DC- and ground, those then are connected together inside laptop in suitable location.

If the laptop power supply would have been built in this way, the noise performance should be pretty much comparable to a traditional grounded PC.

The reason why the laptop power supplies is most probably that fact that using my better grounding practice would make the power cable from PSU to laptop somewhat thicker and more complicated (expensive). There are also issued that more expensive power connector might be needed (that extra pin). There could also be some electrical safety and EMC issues that needs to be taken into account in this apprioach compared to the original grounded output configuration.

7 Comments

  1. Michal says:

    Regarding the connection between “-” on secondary side and PE on primary side – are you sure your power supply isn’t broken? I have just checked four different power supplies (HP, Dell, Lenovo) and not a single one had such connection. In fact, joining PE with anything is a sure way to trigger residual current breaker if one has it in his home. Maybe your noise problems were caused not by the link too far from power jack, but by the fault in PSU itself? Did you try using a different PSU?

    Reply
  2. Computers Laptop says:

    Computers Laptop…

    [...]Improved laptop grounding idea « Tomi Engdahl’s ePanorama blog[...]…

    Reply
  3. Olive Bromley says:

    You made some respectable points there. I appeared on the internet for the problem and located most people will go together with together with your website.Useful info!

    Reply
  4. Iliana Buelna says:

    A formidable share, I just given this onto a colleague who was doing a bit of evaluation on this. And he in actual fact bought me breakfast because I discovered it for him.. smile. So let me reword that: Thnx for the deal with! But yeah Thnkx for spending the time to debate this, I feel strongly about it and love reading more on this topic. If attainable, as you turn into experience, would you mind updating your blog with more details? It’s highly useful for me. Huge thumb up for this blog put up!some tips here!

    Reply
  5. Lasonya Sebald says:

    Good post. I learn something more challenging on totally different blogs everyday. It’ll always be stimulating to read content material from different writers and practice a bit something from their store. I’d desire to use some with the content on my weblog whether you don’t mind. Natually I’ll give you a hyperlink on your internet blog. Thanks for sharing.more tips i found on!

    Reply
  6. stamos says:

    Useful facts. Lucky myself I stumbled upon your web site by chance, that i’m stunned precisely why this specific automobile accident couldn’t taken place previously! I actually book-marked the item.

    Reply
  7. Tomi Engdahl says:

    Much of the laptops chargers may interfere with the operation of other electrical equipment. The pan-European study shows that only a quarter of the chargers were compliant.

    The study says tuk (Safety and Chemicals Agency), which explained the situation, with the 18 other EU;’s market authority.

    Electromagnetic compatibility (EMC electromagnetic compatibility) to ensure that electrical equipment is functioning properly in conjunction with other same platform of devices. Products tested, only 23 percent met all the requirements of the EMC.

    Shortcomings of electromagnetic compatibility can affect the operation of other electrical equipment.

    Laptop chargers surveillance project was carried out during the year. Finland was tested in ten different products available here. Two of them were placed the ban on exports. In addition, given a few comments on labeling and documentation deficiencies.

    “In most cases, in charge devices with markings and documents were not in order, was also exceeded emissions requirements,”

    According to him, the campaign results show that the laptops charging equipment manufacturers electromagnetic compatibility still a lot of room for improvement.

    Source: http://www.tietokone.fi/artikkeli/uutiset/suuri_osa_kannettavien_latureista_ongelmaisia

    Reply

Leave a Reply to Olive Bromley Cancel reply

Your email address will not be published. Required fields are marked *

*

*