Cool uses for the Raspberry Pi

Hackers are buzzing with ideas from Pi-powered arcade machines and drones to the home automation and low-cost tablets. 10 coolest uses for the Raspberry Pi article tells that TechRepublic has delved into the Raspbery Pi’s developer forums, and here’s our round-up of the best ideas so far, ranging from the eminently achievable to the massively ambitious. You can use your Raspberry Pi for example as media streamer, arcade machine, tablet computer, robot controller and home automation controller. Rasberry Pi homepage offers also some more interesting projects like Retro games and a retro joystick.

1,692 Comments

  1. Tomi Engdahl says:

    The Best Laptop Gets Even Better
    https://hackaday.com/2018/11/24/the-best-laptop-gets-even-better/

    This build is really just a 3D printed drive caddy for the Thinkpad UltraBay, the modular standard that allows you to add a CD drive, SATA drive, or even a serial and parallel port to your laptop. [ollie] is modeling this off the CD drive taken from a ThinkPad T420, so we’re looking at a ‘Serial Ultrabay Enhanced’ version of this standard, which is compatible with a T430, which is still the best laptop you can possibly buy.

    UltraBay is originally IBM’s name for the swappable drive bay in the ThinkPad range of laptop computers. When the Thinkpad product line was sold to Lenovo, the concept and the name stayed.

    Inside this 3D printed drive caddy is a Raspberry Pi Zero W, powered by the ThinkPad through the internal SATA connector. The Pi Zero has right-angle headers attached, giving access to the GPIO pins from the outside. Just to add a little flair, [ollie] added an OLED display to show the IP address, the CPU load, and the memory availability of the Pi.

    Reply
  2. Tomi Engdahl says:

    Set Up A Headless Raspberry Pi, All From Another Computer’s Command Line
    https://hackaday.com/2018/11/24/set-up-a-headless-raspberry-pi-all-from-another-computers-command-line/

    There are differences between setting up a Raspberry Pi and installing an OS on any other computer, but one thing in common is that if you do enough of them, you seek to automate the process any way you can. That is the situation [Peter Lorenzen] found himself in, and his solution is a shell script to install and configure the Raspberry Pi for headless operation, with no need to connect either a keyboard or monitor in the process.

    Headless Raspberry Pi Configuration
    http://peter.lorenzen.us/linux/headless-raspberry-pi-configuration

    Configuring a Raspberry Pi for headless operation without having to connect a keyboard and a screen, involves the following step

    Download the latest Raspbian image
    copy the Raspbian image to sdcard
    setup Wifi
    change pasword for pi
    enable sshd
    adduser for me,
    modify group
    add me to sudo
    add athorized ssh keys for me on my laptop so i can login without password
    set timezone
    set hostname
    set keyboard
    run raspi-config to configure various other stuff

    Reply
  3. Tomi Engdahl says:

    Ham Radio Digi Mode Hat for Raspberry Pi
    https://www.youtube.com/watch?v=32nECrl7wsM

    For you Raspberry Pi users, It looks like we finally have an audio codec, GPS, real time clock, and native data ports on a Raspberry Pi hat, purpose built for the portable digital ham radio operator.

    Many of you already know that I made the switch to Raspberry Pi to augment the limited support in the Amateur Radio Community for the Android operating system. Ok we do have psk31, rtty, SSTV, WSPR, WeatherFAX, PSKMail, and AndFLMSG, but we lack FT8, JT65, JS8, WinLink, and many other mode which would have made that platform awesome for digital portable ham radio.

    Now I use my Android tablet as a wireless screen for the Raspberry Pi 3B+, and have integrated the Raspberry Pi into my Yaesu ft-817, and the Yaesu ft-891.

    So what about this device? NW Digital Radio calls it a Digital Radio Amateur WorkStation Board for the Raspberry Pi.

    Reply
  4. Tomi Engdahl says:

    A Raspberry Pi Has This Pool Covered
    https://hackaday.com/2018/12/02/a-raspberry-pi-has-this-pool-covered/

    [DrewBeer]’s pool had just such a problem. A decades-oldwired controller had failed, so rather than stump up a fortune for a refit, he created his own pool controller which exists under the watchful eye of a Raspberry Pi. The breadth of functionality is apparent from his write-up. In addition to the pump and heater you’d expect, he as a salt water system, environmental monitoring, and even an RTL-SDR to pull in readings from an RF floating temperature probe. It’s all exposed via a node.js API, and thus far has been running for over 6 months without mishap.

    https://drew.beer/blog/blog/project-poolbot

    Reply
  5. Tomi Engdahl says:

    Make your own Ambient Lighting with the Raspberry Pi Zero
    https://www.youtube.com/watch?v=JvcR2td1Cso

    In this project I will show you how to combine a Raspberry Pi Zero with a couple of complementary parts in order to add an ambient lighting effect to your TV which enhances the viewing experience.

    Comment:
    Instead of the pi and led strips just buy two TVs and put them back to back.

    Reply
  6. Tomi Engdahl says:

    Roomba Hacked with the New Raspberry Pi 3 Model A+
    https://blog.hackster.io/roomba-hacked-with-the-new-raspberry-pi-3-model-a-64af15826223

    ianderson3 found the dead Roomba in a local thrift store bargain bin for $5. The battery and the rest of components were in good shape, but the Roomba’s motherboard was dead. Basically, it was the perfect candidate for a Raspberry Pi 3 Model A+ retrofit. ianderson3’s tutorial has a thorough explanation of the build, so you can follow along yourself.

    Reply
  7. Tomi Engdahl says:

    Raspberry Pi gets official touchscreen support via Linux 4.21
    https://www.techrepublic.com/article/raspberry-pi-gets-official-touchscreen-support-via-linux-4-21/

    Improved support for display technologies and GPU computing for Polaris and Vega are some of the features coming to kernel 4.21.

    Reply
  8. Tomi Engdahl says:

    DIY Pi Zero Pentesting Tool Keeps it Cheap
    https://hackaday.com/2018/05/15/diy-pi-zero-pentesting-tool-keeps-it-cheap/

    [ Alex Jensen] writes in to tell us of his own tale of sticker shock induced hacking, where he builds his own version of the Hak5 Bash Bunny. His version might be lacking a bit in the visual flair department, but despite coming in at a fraction of the cost, it does manage to pack in an impressive array of features.

    This pentesting multitool can act as a USB keyboard, a mass storage device, and even an RNDIS Ethernet adapter.

    https://www.cron.dk/poor-mans-bash-bunny/

    Reply
  9. Tomi Engdahl says:

    Testing a Raspberry Pi TV Pattern Generator
    https://www.youtube.com/watch?v=NR3X-FwhJMM

    Testing a Raspberry Pi Zero for use in a PAL Pattern generator. It is controlled by buttons. Currently it can display various test cards (Home-made) and generate a teletext feed

    https://github.com/peterkvt80/vbit2/wiki

    Reply
  10. Tomi Engdahl says:

    A basic implementation of a (test) pattern generator from the HDMI output of an raspberry pi.
    https://github.com/LeipeLeon/PiPatternGenerator

    Reply
  11. Tomi Engdahl says:

    Raspberry Pi Private Telephone System (PBX)
    https://blog.hackster.io/a-raspberry-pi-private-telephone-system-pbx-28a8deffac58

    As you might suspect, professional versions can cost thousands of dollars to set up, but as covered in this MagPi article, a Raspberry Pi can do the job for around $100 — including the phones themselves!

    https://www.raspberrypi.org/magpi/raspberry-pi-telephone-exchange/

    Reply
  12. Tomi Engdahl says:

    The No-Parts Temperature Sensor In Your Arduino
    https://hackaday.com/2019/02/26/the-no-parts-temperature-sensor-in-your-arduino/

    The ATMega328p, the chip at the heart of all your Arduino Uno clones, has within it a watchdog timer that clicks over at a rate of 110 kHz. This watchdog timer is somewhat sensitive to temperature

    ‘No-Parts’ Temperature Measurement with Arduino Pro Mini
    https://thecavepearlproject.org/2019/02/25/no-parts-temperature-measurement-with-arduino-pro-mini-to-0-005c-or-better/

    Reply
  13. Tomi Engdahl says:

    An ATtiny Metal Detector
    https://hackaday.com/2019/02/26/an-attiny-metal-detector/

    A metal detector used to be an entirely analogue instrument, an oscillator whose frequency changed with the inductance of its sense coil when a piece of metal approached. [Łukasz Podkalicki] shows us a more sophisticated machine, but with judicious use of an ATtiny 13 it is not a complex one.

    A pulsed induction metal detector induces a current spike in its search coil, and times the decay of the resulting oscillation. The coil is part of a resonant circuit with a capacitor, and any metal in its field will change its resonant frequency.

    ATtiny13 – PI metal detector
    https://blog.podkalicki.com/attiny13-pi-metal-detector/

    Reply
  14. Tomi Engdahl says:

    Raspberry Pi-Powered News Ticker Shirt Display
    https://blog.hackster.io/raspberry-pi-powered-news-ticker-shirt-display-3030438e8bdb

    How to Make a News Ticker Shirt With Raspberry Pi
    by Stephen Hawes March 6, 2019 at 8:15 AM
    https://www.tomshardware.com/reviews/raspberry-pi-news-ticker-shirt,6014.html

    Naturally, we designed our device to show the latest news headlines from Tom’s Hardware. But you could just as easily point the script toward any content you want on the Internet (it uses Wi-Fi to download the data). Here’s how to make your own news ticker shirt.

    Reply
  15. Tomi Engdahl says:

    Do advanced math with Mathematica on the Raspberry Pi
    https://opensource.com/article/19/3/do-math-raspberry-pi?sc_cid=7016000000127ECAAY

    Wolfram bundles a version of Mathematica with Raspbian. Learn how to use it in the 12th article in our series on getting started with Raspberry Pi.

    Reply
  16. Tomi Engdahl says:

    Angstrom Is a Rainbow in a Box!
    https://blog.hackster.io/angstrom-is-a-rainbow-in-a-box-3493d1575b72

    This device produces light with not one, three, or four LED elements, but combines 12 channels into a single LED light, and can be built for under £100 (~$130 in US currency). LEDs are powered via a 5V 60W supply

    Listed applications for the Angstrom include microscopy, forensics, colorimetry, and scanning.

    https://www.instructables.com/id/Angstrom-a-Tuneable-LED-Light-Source/

    Reply
  17. Tomi Engdahl says:

    The Raspberry Pi Cluster from Outer Space
    https://hackaday.com/2019/03/15/the-raspberry-pi-cluster-from-outer-space/

    A Pi-Powered Plan 9 Cluster
    https://www.rs-online.com/designspark/a-pi-powered-plan-9-cluster

    Plan 9 from Bell Labs comes from the same stable as the UNIX operating system, which of course Linux was designed after, and Apple’s OS X runs on top of a certified UNIX operating system. Just like UNIX, Plan 9 was developed as a research O/S — a vehicle for trying out new concepts — with it building on key UNIX principles and taking the idea of devices are just files even further.

    Reply
  18. Tomi Engdahl says:

    Talk To Your ‘Scope, And It Will Obey
    https://hackaday.com/2019/03/03/talk-to-your-scope-and-it-will-obey/

    An oscilloscope is a device that many of us use, and which we often have to use while our hands are occupied with test probes or other tools. [James Wilson] has solved the problem of how to control his ‘scope no-handed, by connecting it to a Raspberry Pi 3 running the snips.ai voice assistant. This is an interesting piece of software that runs natively upon the device in contrast to the cloud service provided by the likes of Alexa or Google Assistant.

    https://github.com/jmwilson/ollie

    Reply
  19. Tomi Engdahl says:

    Build a One-Button Streaming Box for Your Radio Show with a Raspberry Pi
    https://blog.hackster.io/build-a-one-button-streaming-box-for-your-radio-show-with-a-raspberry-pi-cdc28ef2149d

    Then setup your internet radio streaming server. Finally, connect the buttons and lights to the Pi’s GPIO pins. You’ll use a Python script that starts up at boot to monitor those, and the second button will let you safely shutdown the Pi after streaming.

    Reply

Leave a Reply to Tomi Engdahl Cancel reply

Your email address will not be published. Required fields are marked *

*

*