Engineers use the word “ground” in every electronic circuit to denote some part of a system or structure that is “neutral,” or zero potential. Unfortunately, we often think of circuits and systems, especially those with both analog and digital signals, as having more than one ground. This concept gave rise to a recent discussion on a signal-integrity online community
Engineers and PCB designers often mention various types of grounds and methods for connecting them together.
The kinds of grounds mentioned in this discussion include:
Logic ground
Analog ground
Chassis ground
Safety ground
Earth ground
Methods proposed for connecting these various “grounds” cover a broad range of options including:
Connecting them at only one point.
Cutting the ground plane under a mixed signal component
Connecting them with capacitors.
Segmenting the ground plane in a PCB such that there is only a narrow connection at one place between the analog and digital sides of the design.
Separating the analog and digital grounds.
These seemingly conflicting methods for dealing with ground can be a bit confusing. We’ll start by clarifying what ground is, which should reduce the confusion.
We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.
We are a professional review site that has advertisement and can receive compensation from the companies whose products we review. We use affiliate links in the post so if you use them to buy products through those links we can get compensation at no additional cost to you.OkDecline
7 Comments
Tomi Engdahl says:
Properly ground your circuits
http://www.edn.com/design/pc-board/4443239/Properly-ground-your-circuits
Engineers use the word “ground” in every electronic circuit to denote some part of a system or structure that is “neutral,” or zero potential. Unfortunately, we often think of circuits and systems, especially those with both analog and digital signals, as having more than one ground. This concept gave rise to a recent discussion on a signal-integrity online community
Engineers and PCB designers often mention various types of grounds and methods for connecting them together.
The kinds of grounds mentioned in this discussion include:
Logic ground
Analog ground
Chassis ground
Safety ground
Earth ground
Methods proposed for connecting these various “grounds” cover a broad range of options including:
Connecting them at only one point.
Cutting the ground plane under a mixed signal component
Connecting them with capacitors.
Segmenting the ground plane in a PCB such that there is only a narrow connection at one place between the analog and digital sides of the design.
Separating the analog and digital grounds.
These seemingly conflicting methods for dealing with ground can be a bit confusing. We’ll start by clarifying what ground is, which should reduce the confusion.
Tomi Engdahl says:
https://www.google.com/url?sa=t&source=web&rct=j&url=https://www.aes.org/standards/comments/drafts/aes48-xxxx-190121-cfc.pdf&ved=2ahUKEwjukuG9jpXwAhWPtYsKHRmzDbsQFjACegQIBRAC&usg=AOvVaw3sNteSLEjKzb6RASIewXKU
Tomi Engdahl says:
https://resources.altium.com/p/how-to-use-a-star-point-for-analog-ground-digital-ground-connection
Tomi Engdahl says:
https://sound-au.com/earthing.htm
Tomi Engdahl says:
Here is a good read: http://hifisonix.com/wordpress/wp-content/uploads/2021/04/Reducing-Loop-Area-in-Audio-Amplifiers.pdf
Tomi Engdahl says:
Earthing Your Hi-Fi – Tips, Tricks and Techniques
https://sound-au.com/earthing.htm
Tomi Engdahl says:
This might be useful. http://www.valvewizard.co.uk/Grounding.pdf