Motor protector teardown

Here is GE MT03M motor protector: Contactor, Miniature, Overload Relay, 5.5-8.0A Range

• Control circuit up to 690V
• Power circuit up to 690V
• Three-pole differential (phase unbalance protection)
• Automatic ambient temperature compensation between – 25ºC and + 60ºC
• Choice of manual or automatic reset
• Direct connection to contactor or independent mounting using accessories.
• Screw and Ring terminal versions
• Terminals protected against accidental contact in accordance with VDE 0106 T.100 and VBG4.
• Terminal numbering in accordance with EN 50005
• Degree of protection IP20 (EN 60529)
• Additional auxiliary contact block 1NO (with manual reset only)

This device is designed to be installed to a motor controlling contactor. It detects overload situation and then disconnects the coil control current from contactor which causes it to open the contacts – thus disconnecting motor from power source.

• Reset button, 2 positions : Manual(H) and Automatic(A) by turning the blue selector.
• Stop push button, independent of reset (red).

Look inside

Closeup

There are three bi-metallic strips that have heating wires around them. When the temperature gets high enough those bend to trip the device.

The complicated looking mechanism connected to bimetallic current sensing parts is designed to work so that it when all three phases are loaded with same current, it trips at rated current. When there is serious imbalance (different currents on different phases), the device works at lower current rating.

There are no opening contacts for the phase currents, because the contactor handles breaking the current if needed. The only contact on this device is the one that breaks or makes the contactor coil drive current (on the left side of the device).

Check also my other motor protector teardown.

6 Comments

  1. Ava Hunter says:

    Being a student of mechanical engineering, I often research for such procedural posts that not only teach me some interesting ideas but also strictly direct me to follow the precautionary measures. Here the motor protector teardown reveals many things which I don’t know before. I am thinking to write research paper for me on such mechanical topic with the help of studyclerk.com/write-research-paper-for-me website in order to spread this message to my fellow students.

    Reply
  2. Ava Hunter says:

    This is an amazing type of post.

    Reply
  3. Katy C. Nix says:

    just visit https://www.epanorama.net site for quality work.

    Reply
  4. Katy C. Nix says:

    Keep it up

    Reply
  5. Ayden watkins says:

    The GE MT03M motor protector offers a comprehensive solution for safeguarding motor operations. With features such as control and power circuit compatibility up to 690V, three-pole differential protection, and automatic temperature compensation, it ensures reliable performance across varying conditions of Allessaywriter. The option for manual or automatic reset adds versatility, while the terminal configurations cater to different installation needs. Compliance with safety standards like VDE 0106 T.100 and VBG4 underscores its reliability. The inclusion of an auxiliary contact block further enhances its functionality. In essence, the GE MT03M exemplifies efficiency and precision in motor protection, making it an essential component for any industrial setup.

    Reply
  6. Harry Disouza says:

    This GE MT03M motor protector is a versatile device designed for controlling and protecting motors. With features like automatic ambient temperature compensation and overload detection, it ensures reliable operation in various conditions. Its compact design and options for manual or automatic reset make it a convenient choice for industrial applications. Plus, with philosophy homework help, students can focus on their studies while this device takes care of motor protection needs.

    Reply

Leave a Reply to Ayden watkins Cancel reply

Your email address will not be published. Required fields are marked *

*

*