Here is a good collection videos on SMD soldering and replacing SMD components. Enjoy.
Replacing SMD components without burning neighboring connectors without hot tweezers
Desoldering Techniques
One Hit Desoldering
Desoldering without hot air
How to Solder properly || Through-hole (THT) & Surface-mount (SMD)
Sostituzione connettore alimentazione micro usb step by step
How to repair bridge and excess solder
When to use Flux ?
SMD Soldering – Small Packages
PACE Inc. Soldering SMD fine pitch component (8a) Hot Air Mini Wave Soldering
EEVblog #997 – How To Solder Surface Mount Components
Master Soldering: IPC-J-STD-001 Soldering Techniques
How to Solder Surface Mount parts (it’s easy!)
Glue and Solder Surface Mount Components – PWM5 Femto
My SMD soldering tools and technique
SMD Soldering Tutorial 2018 // Different SMD Soldering Techniques
SMD Soldering – the easy way
I have been prototyping a number of small circuits recently each using SMD parts, each time a new board comes in I need to solder up a few of the boards for testing.
To speed up this soldering process I have come up with a simple workflow that doesn’t require much set up, equipment or tidying up.
Surface Mount Soldering Tips and Tricks
EEVblog #997 – How To Solder Surface Mount Components
52 Comments
Tomi Engdahl says:
45) Solder Surface Tension and Why You Should Care
https://www.youtube.com/watch?v=opPDZnmrPPE
I have a PCB design that’s been giving me some trouble during the reflow process. That got me thinking, surface tension of solder is a pretty interesting and useful thing. In this video, I look at what surface tension is, how it’s useful and some of the problems that it can create.
Tomi Engdahl says:
Get To Know The Physics Behind Soldering And The Packaging Of ICs
https://hackaday.com/2019/05/03/get-to-know-the-physics-behind-soldering-and-the-packaging-of-ics/
Tomi Engdahl says:
https://hackaday.com/2019/05/30/the-fascinating-world-of-solder-alloys-and-metallurgy/
Tomi Engdahl says:
https://hackaday.com/2019/06/05/solder-smds-with-a-pan-o-sand/
Tomi Engdahl says:
SDG #046 SMD Assembly Using Solder Paste Stencil and Hot Air with PCBs from JLCPCB
https://www.youtube.com/watch?v=PBaUSb_jzps
Fast PCB assembly using solder paste for SMD SMT components
SDG #047 SMD Assembly Using a Paste Dispenser and Hot Air with PCBs from JLCPCB
https://www.youtube.com/watch?v=9jNe3wzrmuw
A test of the DS 982 Solder Paste Dispenser for SMD/SMT assembly
Tomi Engdahl says:
SDG #044 Make a Manual Pick and Place Tool for SMD Assembly and Rework
https://www.youtube.com/watch?v=9G510G2gmdo
Tomi Engdahl says:
This kind of tweezer soldering iron is useful somerimes when working with SMD components on tight places. Also pair of small soldering irons can be used. Or putting in lots of heat protection to surrounding components (copper or aluminum foil in right way) and then use hot air.
https://youtu.be/smsGXa2rW0c
Tomi Engdahl says:
A Dead Macbook GPU Shouldn’t Stop You, With This BGA Soldering Hack
https://hackaday.com/2020/06/28/a-dead-macbook-gpu-shouldnt-stop-you-with-this-bga-soldering-hack/
Tomi Engdahl says:
From NanoVNA discussion on repairing:
snapped the TX side sma attachment right off, while carrying the Nanovna in my pocket with a gender connector attached. Note how it tore the metal right off of the board where it connected. The back side connection area left some solder and metal to re-solder to. The top one did not. I assume it cannot be fixed?
There is a way to repair this, and it could be as good as new (possibly uglier than new).
There are two parts: fix the electrical connection and fix the mechanical connection. If you replace the strip that was taken off the board with a flat piece of metal (copper tape cut down to size, for example), solder everything in place, and then carefully epoxy the new piece of metal to the circuit board.
You might want to practice a couple of times on some scrap circuit boards to perfect your technique.
It might take a lot of time and patience
See https://www.mclpcb.com/guide-pad-lift-issues-pcb/ and https://www.instructables.com/id/Repairing-a-Damaged-Pad-on-a-PCB/ and maybe https://www.eevblog.com/forum/beginners/glue-for-lifted-trackspads/ for some tips.
Good luck!
Tomi Engdahl says:
How to make a hot air gun using glow plug
https://www.youtube.com/watch?v=VzmsNIsR1EI
How to make hot air gun using glow plug
How to DIY Home Made HowTo
Hot air gun at home
Homemade
Hot air gun simple at home
homemade hot air blower
making hot air gun
diy hot air gun
Glow plug ideas
Warning! Do not try this at home, anything you try in this video is at your own risk be safe.
Tomi Engdahl says:
How To Solder SMD Correctly – Part 1 /SMD Soldering Tutorial
https://www.youtube.com/watch?v=EW9Y8rDm4kE
Tomi Engdahl says:
How To Solder SMD Correctly – Part 2 /SMD Soldering Tutorial
https://www.youtube.com/watch?v=4zXP0TtORWo
How to solder SMD correctly is nicely shown in this series of short video guides fully explaining how it’s achieved.
See how you can solder SMD connectors , Resistor Networks and more with the aid of great hints and tips and nicely backed up with clear and precise photographs of every completed component.
Learn SMD soldering techniques with this smd soldering tutorial and remember , it can be achieved
Tomi Engdahl says:
How To Remove Surface Mount IC/smd IC – Learn 4 Neat Methods
https://www.youtube.com/watch?v=LL23ZJahcfY
See how to remove a surface mount IC / SMT IC using 4 great different methods with and without the use of a hot air rework station.
These 4 different methods for how to remove surface mount ic’s can be carried out using a variety of standard tools so there is a method for everyone as I appreciate not all viewers will have a hot air rework station.
2 and 4 sided IC removal can be easily achieved by following these short tutorials on all 4 methods with clear guidance and tips throughout.
Please note if your IC’s have a HEATPAD underneath the body you will need option 1 , the hot air pencil method.Also if you are using the 2 soldering iron method PLEASE make sure the board is not powered up when performing this option.
All these IC removal methods are proved and trusted and with some care you will easily achieve your IC removal successfully without a problem.
Finally if you found this video of use please consider my other YouTube soldering tutorials and be sure to not miss out on any future releases by subscribing and turning on the notification button.
Thank you for your time and good luck.
Mr SolderFix
Tomi Engdahl says:
Make Your Desoldering Easier By Minding Your Own Bismuth
https://hackaday.com/2021/06/02/make-your-desoldering-easier-by-minding-your-own-bismuth/
Any video that starts with a phase diagram has instantly earned our attention. Admittedly, we have a pretty low bar for that kind of stuff, but eye candy aside, [Robin Debreuil]’s quick outline of his technique for desoldering with the help of bismuth is worth watching.
Desoldering PCBs With Bismuth
https://www.youtube.com/watch?v=prw8smYuAIc
Tomi Engdahl says:
https://hackaday.com/2021/06/22/steady-hand-brings-gba-cart-back-from-the-grave/
Tomi Engdahl says:
https://hackaday.com/2021/09/15/laptop-gets-fixed-by-simply-removing-problem-component/
Tomi Engdahl says:
REBALLING RAM
https://www.youtube.com/watch?v=B5g1AcDIjZw
REBALLING RAM – BGA REBALLING
https://www.youtube.com/watch?v=JWR5hIKAc7g
Tomi Engdahl says:
How to Reball eMMC BGA 153 Tutorial #3 | Tech Tomer
https://www.youtube.com/watch?v=LZRqfJ7qvTA
Basic eMMC BGA 153 Reballing Tutorial for Beginners | Tech Tomer
Do not put the solder paste on your finger! That’s a good way to get heavy metal poisoning! Instead, use a piece of plastic like an old credit card to push it into the holes on the stencil.
Tomi Engdahl says:
Broken USB 3.0 Flash drive Data Recovery Tricky one
https://www.youtube.com/watch?v=B_RqVD66VT0
In This repair video we will work on a USB 3.0 flash drive with a USB socket that came in for data recovery.
Tomi Engdahl says:
You Can’t Upgrade Soldered-On Laptop RAM? Think Again
https://hackaday.com/2021/11/24/you-cant-upgrade-soldered-on-laptop-ram-think-again/
Upgrading the memory in a computer is usually a straightforward case of swapping out a few DIMMs or SODIMMs, with the most complex task being to identify the correct type of memory from the many available. But sometimes a laptop manufacturer can be particularly annoying, and restrict upgradability by soldering the RAM chips directly to the board. Upgrading memory should then be impossible, but this reckons without the skills of [Greg Davill], who worked through the process on his Dell XPS13.
The write-up is a fascinating primer on how DRAM identification works, which for removable DIMMs is handled by an onboard FLASH chip containing the details of the chips on board. A soldered-on laptop has none of these, so instead it employs a series of resistors whose combination tells the BIOS what memory to expect.
Dell XPS13 RAM Upgrade (7390)
https://gregdavill.github.io/posts/dell-xps13-ram-upgrade/
Tomi Engdahl says:
SMD Soldering Tutorial | Guide | Tools | Tecniques | Stencil
https://www.youtube.com/watch?v=fYInlAmPnGo
In this video I show you a few tecniques for soldering SMD components. We start easy with two pins components of size 1206, 0805, 0603 and 0402. Then some SOT23 and some SOP8 and SOP16. We also solder microcontroller, QFN chip with soldering stencil and solder paste and the hot air gun.
Tomi Engdahl says:
Desoldering and soldering SMD components with a minimum of equipment.
https://www.youtube.com/watch?v=_g8mvs482Ng
Tomi Engdahl says:
How to do SMD Reflow Soldering properly! || Hot Air VS Sand VS Reflow Oven
https://www.youtube.com/watch?v=DYrucIWig24
Tomi Engdahl says:
How to Solder QFN MLF chips Using Hot Air without Solder Paste and Stencils
https://www.youtube.com/watch?v=c_Qt5CtUlqY
Tomi Engdahl says:
Master Soldering: Surface Mount Fine-Pitch – Highly Recommended
https://www.youtube.com/watch?v=6PB0u8irn-4
Tomi Engdahl says:
Interesting looking small SMD soldering/desoldering hot plate:
MHP30 Mini OLED Hot Plate Preheater 60W 350℃ Soldering Station Preset Temperature for PCB SMD Heating
https://www.banggood.com/MHP30-Mini-OLED-Hot-Plate-Preheater-60W-350-Soldering-Station-Preset-Temperature-for-PCB-SMD-Heating-p-1776524.html?imageAb=1&utm_source=googleshopping&utm_medium=cpc_organic&utm_content=minha&utm_campaign=minha-us-pc¤cy=EUR&cur_warehouse=USA&createTmp=1&utm_source=google&utm_medium=cpc_ods&utm_content=sophia&utm_campaign=sophia-cdm-keyboard-0108&ad_id=537738426404&gclid=EAIaIQobChMItcH4m_f09AIVlvCyCh1reA4tEAEYASABEgLrY_D_BwE&DCC=FI&akmClientCountry=FI
Tomi Engdahl says:
200x200mm 946C 110 220V 850W Hot Plate Preheat Preheating Desoldering Station for PCB SMD Heating – 220V EU Plug
https://www.banggood.com/200x200mm-946C-110-220V-850W-Hot-Plate-Preheat-Preheating-Desoldering-Station-for-PCB-SMD-Heating-p-1348275.html?rmmds=detail-topright-recommendation&cur_warehouse=CN&ID=523699&trace_id=6dbd1640694718079
Tomi Engdahl says:
SMD Soldering Tutorial | Guide | Tools | Tecniques | Stencil
https://www.youtube.com/watch?v=fYInlAmPnGo
In this video I show you a few tecniques for soldering SMD components. We start easy with two pins components of size 1206, 0805, 0603 and 0402. Then some SOT23 and some SOP8 and SOP16. We also solder microcontroller, QFN chip with soldering stencil and solder paste and the hot air gun.
Tomi Engdahl says:
Homemade Innovation that will help you a lot , you Can Do it yourself
https://www.youtube.com/watch?v=k0ncMoYYbC8
Hello Geniuses in this video i’m gonna show you How to make an amazing Tool to Remove SMD Components , You Can Make At Home its very Simple
Such a hybrid tool just like hot air blower+ twizzer combination
Tomi Engdahl says:
Homemade Reflow Hot Plate for SMD Soldering – 3000W
https://www.youtube.com/watch?v=C7blZigaaaA
Viewer comments:
This hot plate idea is really interesting. I like how the main component is very common and cheap. Wish some other electronics youtubers would do more creative stuff like this.
A GFCI plug is needed first thing so you are protected during prototyping. Then like you said cover all the mains voltage connections before you consider the project finished. Also don’t let any mains voltage cables get within 1 cm of the low voltage cables. You don’t want failed wire insulation to energize your low voltage stuff at mains voltage.
I would personally recommend to be careful with mains wires, in case of the awg cables, the main ones have a double insulation, not a simple one to lower electric shock hasard, also the cable that go to the heater may need to be protected from heat, or else, the insulation could easily go out.
Also you are clearly using ATX power supply wires to connect the power cord to the ssr, the are comonly (if not all the time) 20AWG or 18AWG, wich means a section of .6mm^2 or 0.8mm^2. clearly undersized for 13 amps
Theses precautions may not be necessary on a prototype, but on a final machine taht will be used oftenly, safety should be mandatory. Also, do you think of aquiring a pick and place, maybe the index project by stephen hawes will intrest you
Modern irons like that have very limited amount of metal, and low thermal mass.
Its better to use an old iron with thick metal, you get more even heating.
You can also try a cover over the pcb, to keep heat in and make the temperature more even. A glass Pyrex bowl can work very well.
Tomi Engdahl says:
DIY Hotplate
https://www.youtube.com/watch?v=N6IDYX8NdPc
Tomi Engdahl says:
Reflow Hotplate Teardown Uncovers The Bare Minimum
https://hackaday.com/2022/03/10/reflow-hotplate-teardown-uncovers-the-bare-minimum/
[EEforEveryone] is trying to find a good hot plate for reflow soldering. After trying one cheap unit, he got another one. He was a bit underwhelmed. The grounding was suspect and the bed wasn’t totally flat. He tore it apart and was surprised that there was very little inside. While the construction wasn’t perfect, it was better than the previous unit. You can see a video of the teardown and review below.
Before powering it up, the first order of business was to rewire the ground system. After that, it was time to try it. However, by confusing Fahrenheit and Centigrade, he set the temperature much higher than necessary which creating a little smoke. Fixing the temperature helped, but there was still a bit of a smoky smell that eventually subsided.
The verdict? The hot plate worked well enough, but you probably do want to check the ground wiring before using it.
DIY Reflow – but it works this time! | MOT12
https://www.youtube.com/watch?v=jViX0AW-8V0
Reflow can be tricky, but having the right tool for the job is always the first step. The PCBA preheater didn’t work well, let’s try a hot plate! This 850W 200X200mm hot plate got the job done… though it did smoke a little.
Tomi Engdahl says:
Solder paste and hot air soldering of switch
https://youtube.com/shorts/xeDFiEEb_Ms?feature=share
Tomi Engdahl says:
Electronic Solder Paste Dispenser Homemade | 3D PRINTED
https://www.youtube.com/watch?v=UOLfrX_VPw0
I needed a paste dispenser for when I solder SMD components. This has a 3D printed case and a small DC motor with gears to push a piston and push the paste out of the syringe. We can control some settings on the screen. I amde with and Arduino and H bridge.
Tomi Engdahl says:
SMD Soldering Tutorial | Guide | Tools | Tecniques | Stencil
https://www.youtube.com/watch?v=fYInlAmPnGo
In this video I show you a few tecniques for soldering SMD components.
Tomi Engdahl says:
For once I found one of these clickbait videos that actually is a worthwhile project. But it needs to be a 120VAC element and the chassis needs to be grounded. And I think it could be smaller and use a bit more power(?) But it’s a solid project.
How To Make Solder Remover Machine At Home | Desoldering Machine
https://m.youtube.com/watch?v=JDt1QvS0cG8&feature=youtu.be
Tomi Engdahl says:
https://hackaday.com/2022/04/14/a-nitrogen-soldering-iron-review/
Tomi Engdahl says:
https://hackaday.com/2021/04/27/review-sequre-sq-d60-temperature-controlled-soldering-iron/
Tomi Engdahl says:
The perfect way to NOT do SMD rework (RGB2HDMI overview and repair)
https://www.youtube.com/watch?v=atb04zJ390Q
On today’s video, I try to repair a RGB2HDMI by swapping the main SMD CPLD chip. I really do suck at SMD soldering, so watch me struggle to do this work. Will the board work after my attempted repair? Watch to find out!
Tomi Engdahl says:
Flux
https://youtu.be/OWNAjwhwzro
Tomi Engdahl says:
Surface Mount Soldering Practice For Budding Electrical Engineers
https://hackaday.com/2022/10/04/surface-mount-soldering-practice-for-budding-electrical-engineers/
Electronics components are steadily moving away from through hole parts to using surface mount technology (SMT) exclusively. While the small size of the SMT components can be intimidating, with a little practice, soldering can come pretty naturally. To help folks get over their fear of soldering small parts, [Alpenglow Industries] have created a charming board to practice SMT soldering skills on.
SMT Garden
https://www.alpenglowindustries.com/smt-garden.html#/
Tomi Engdahl says:
A Recipe to Make Your Own Natural Rosin Soldering Flux
To provide a safer alternative to the chemical-laden stuff, catsndogs came up with a recipe for rosin flux that uses natural ingredients.
https://www.hackster.io/news/a-recipe-to-make-your-own-natural-rosin-soldering-flux-7927667b6fe0
Soldering is likely the most common skill among makers. With the exception of some basic components that fit together with special connectors, almost every electronic project requires at least some soldering. Most people start with a soldering iron and through-hole components, then move onto more advanced hot air soldering with SMD (surface-mount device) components as needed. Rosin flux comes in handy for both types of soldering, but the chemicals in commercial rosin flux can cause health problems. To provide a safer alternative, catsndogs came up with a recipe for rosin flux that uses natural ingredients.
https://hackaday.io/project/187703-rosin-soldering-flux-diy
Tomi Engdahl says:
Dangerous Prototypes flux-off solder flux test
https://www.youtube.com/watch?v=uJNjNOAxvqY
We test four types of flux we had around the workshop: syringe, liquid, marker, and paste. Which is easiest?
Flux-off part 2: another solder flux comparison
https://www.youtube.com/watch?v=yTV8gtSX6tg
Dangerous Prototypes compares three types of syringe flux with a solid block of rosin while soldering a TQFP chip. Find out which worked the best.
Tomi Engdahl says:
Internal Heating Element Makes These PCBs Self-Soldering
https://hackaday.com/2023/01/18/internal-heating-element-makes-these-pcbs-self-soldering/
Surface mount components have been a game changer for the electronics hobbyist, but doing reflow soldering right requires some way to evenly heat the board. You might need to buy a commercial reflow oven — you can cobble one together from an old toaster oven, after all — but you still need something, because it’s not like a PCB is going to solder itself. Right?
Wrong. At least if you’re [Carl Bugeja], who came up with a clever way to make his PCBs self-soldering. The idea is to use one of the internal layers on a four-layer PCB, which would normally be devoted to a ground plane, as a built-in heating element. Rather than a broad, continuous layer of copper, [Carl] made a long, twisting trace covering the entire area of the PCB. Routing the trace around vias was a bit tricky, but in the end he managed a single trace with a resistance of about 3 ohms.
When connected to a bench power supply, the PCB actually heats up quickly and pretty evenly judging by the IR camera. The quality of the soldering seems very similar to what you’d see from a reflow oven. After soldering, the now-useless heating element is converted into a ground plane for the circuit by breaking off the terminals and soldering on a couple of zero ohm resistors to short the coil to ground.
https://github.com/CarlBugeja/Open-Reflow
Self-Soldering Circuits
https://www.youtube.com/watch?v=r0csHZveVvY
Tomi Engdahl says:
Surface Mount Resistor Guide / SMD Resistor Soldering
https://www.youtube.com/watch?v=4KFsHw7dONs
In this clear Surface Mount Resistor guide you will see neat , concise soldering methods showing you how to solder differing types of SMD resistors while clearly explaining component codes , MELF colour values and soldering temperatures needed to correctly place your various resistor packages.
With short video demonstrations , hints and tips and photographs throughout you will see all of the basic soldering methods needed to fit most of the common resistor packages used on today’s PCB’s.
If you enjoy this guide and find it of use please like and subscribe so as to not miss out on any future releases on the Mr SolderFix YouTube channel.
Thank you for your time and good luck with all of your future soldering projects.
Mr SolderFix
Tomi Engdahl says:
https://hackaday.com/2023/11/01/making-a-solder-paste-stencil-from-what-you-have-on-hand/
Tomi Engdahl says:
https://hackaday.com/2024/01/29/flux-from-scratch/
Tomi Engdahl says:
Somebody have asked about the smallest SMD components that exist at present times.
Let me show you 008004 component scale, single element is just 0.25×0.125mm, I suppose in funny units it’s something like 008×004.
Here you can see pick and place process machine.
Enjoy!
https://m.youtube.com/watch?si=7wFeGiHD095eHxYx&fbclid=IwAR3KxlSeT3zYlNrNWySyHM31Yk4mU7L27iJnACo0NShrnJGU1ferRuFFHAA&v=Sy9H3eBxx7c&feature=youtu.be
Tomi Engdahl says:
https://www.macrofab.com/blog/practical-guide-solder-flux/
Tomi Engdahl says:
How To Solder SMD / Surface Mount IC ( QFN , QFP + PLCC )
https://www.youtube.com/watch?v=0LSG5uIdqJc