We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.
We are a professional review site that has advertisement and can receive compensation from the companies whose products we review. We use affiliate links in the post so if you use them to buy products through those links we can get compensation at no additional cost to you.OkDecline
12 Comments
Tomi Engdahl says:
A plumbtrician task
https://www.facebook.com/groups/123472848335616/permalink/771169310232630/
Tomi Engdahl says:
“fuse is useless” ..and stupidity is limitless
Tomi Engdahl says:
Main fuse was a Nail, Electrician
https://www.youtube.com/watch?v=IUL-w04ubAs
Back in the unit to see what happens when a nail is used as a main fuse which I have seen personally on a job,
Now you know why welders wear masks/goggles !
Tomi Engdahl says:
Popping a 5000A Fuse
https://www.youtube.com/watch?v=0mGhhdPgXG8
The fuse itself was purchased from eBay from the U.S.
Tomi Engdahl says:
Testing 100A Fuses with 100A of current.
https://www.youtube.com/watch?v=6o9tbhgtws4
Tomi Engdahl says:
Lucas the Prince of Darkness
https://www.mez.co.uk/lucas.html
Tomi Engdahl says:
Lucas Replacement Wire Harness Smoke
https://www.orarc.org/?p=2348
Thought this might be worthy of dissemination. A bottle in every ham shack, I wonder if they make a negative earth version?
Tomi Engdahl says:
https://www.reddit.com/r/pics/comments/2l43vi/a_guide_for_electrical_fuse_replacement/
Tomi Engdahl says:
Popping a 5000A Fuse
https://www.youtube.com/watch?v=0mGhhdPgXG8
Tomi Engdahl says:
https://www.swe-check.com.au/pages/learn_fuse_speed.php
Tomi Engdahl says:
Shay Russell Louis Rossman did a video about fuse problems a while back. Generic Chinese fuses often would fail to blow at 4 and 5 x overload
https://youtu.be/B90_SNNbcoU?si=MJEP1blJPKGZjYT4
It’s been a problem for years: https://money.cnn.com/2007/09/05/autos/fuse_recall/
So when the fuse refuses to fuse, do you need to re fuse the whole thing?
Tomi Engdahl says:
https://www.mouser.fi/datasheet/2/87/eaton_mdl_time_delay_glass_tube_fuses_data_sheet-1608815.pdf