https://www.baldengineer.com/six-oscilloscope-measurements-using-arduino.html
You can use these 6 oscilloscope measurements, and just an Arduino Uno, to learn how to use a new or unfamiliar digital scope.
This tutorial is a general explanation on how to setup the Arduino and a screenshot to help identify if you set up your scope correctly.
6 Comments
Tomi Engdahl says:
Measure phase difference with an oscilloscope
https://www.edn.com/design/test-and-measurement/4460859/Measure-phase-difference-with-an-oscilloscope?utm_source=Aspencore&utm_medium=EDN&utm_campaign=social
Tomi Engdahl says:
http://addohms.com/learn-to-use-an-oscilliscope
Tomi Engdahl says:
https://www.circuitbasics.com/what-are-oscilloscopes/
Tomi Engdahl says:
https://www.edn.com/digital-vs-analog-triggering-in-oscilloscope-whats-the-difference/
Tomi Engdahl says:
Six Tips for Power Integrity Debug with an Oscilloscope
Dec. 1, 2021
Detailed real-world advice and demonstrations of multiple techniques on a sample microcontroller board can help you debug your power integrity problems fast.
https://www.mwrf.com/technologies/test-measurement/article/21182559/teledyne-lecroy-six-tips-for-power-integrity-debug-with-an-oscilloscope?utm_source=RF%20MWRF%20Today&utm_medium=email&utm_campaign=CPS211203051&o_eid=7211D2691390C9R&rdx.ident%5Bpull%5D=omeda%7C7211D2691390C9R&oly_enc_id=7211D2691390C9R
What you’ll learn:
Remember fundamentals and practice situational awareness in taking measurements.
It’s not only using the right probe, but it’s also using the probe right.
Eliminating measurement artifacts is tricky, but not impossible.
Tomi Engdahl says:
https://hackaday.com/2023/04/08/homemade-scope-does-supercapacitor-experiments/